How you can repair the entrance going through camera in your iPhone 4? In case your a FaceTime addict and the entrance going through camera is providing you with suits, it might must be changed. Listed below are 13 straightforward steps that explains how one can do it.
Step 1:
– Flip off your iPhone
Step 2:
– Take away the underside 2 screws in your iPhone 4. Use your 5 level safety screwdriver for this as all variations of the CDMA iPhone 4 have safety screws within the dock connector.
– To take away the again merely slide the again upwards and raise it off gently.
Step 3:
– Take away the battery, you may have to take away the #00 screw holding the battery clip in place. Take away this screw situated to the underside left of the battery.
– The metallic clip on the battery is what clips the battery to the logic board. You may have to pop this clip up along with your plastic pry tool. Merely stick the top of your pry tool beneath the clip and gently pull upwards till it unfastens from the logic board.
DO NOT USE THE PLASTIC PULL TAB, there’s a variety of adhesive and the tab will break or you’ll injury the battery. As an alternative run your pry tool alongside the fitting facet of the battery and break the adhesive that manner. As soon as the battery is free from the adhesive, you may pull the battery out of the phone. There aren’t any different connectors holding it in.
Step 4:
– Take away the grounding clip, it’s to the left of the place you disconnected the battery. You’ll seen one other screw that’s holding within the grounding clip over the antenna, take away this screw.
– Unscrew the one screw holding the grounding clip in place along with your #00 Phillips screwdriver.
– Gently raise the grounding clip out of the gadget.
Step 5:
– Take away the dock connector protect and disconnected the cable
– There’s a protect held on with two screws masking the dock connector cable. Take away the 2 screws holding it in place.
– Subsequent, use your pry tool to pry up the precise dock connector cable.
Step 6:
– Unclip the antenna from the logic board, Beneath the place you eliminated the grounding clip, you may see a tiny round cable. You may have to unclip it from the logic board.
– Take the sting of your pry tool or spudger and gently pry up the round head to detach it from the logic board.
– You may discover the cable is wound round some metallic brackets. Simply gently information it out of the brackets along with your pry tool and finger. It is connected to the speaker meeting.
Step 7:
– Take away the highest logic board protect, There are 5 screws holding the logic board protect in place. Take away the 5 screws holding it in place plus screw number 6 off to the fitting. Simply be sure you keep in mind which holes they got here out of because the screws are totally different sizes.
– Subsequent you may have to take away the protect. There’s a tiny clip constructed into the protect holding it in place. Seize the protect by the highest the place the highest screw got here out and gently raise up and push down. The underside notch will come out and it is best to have the ability to gently raise the protect out of the gadget.
Step 8:
– Take away wifi antenna grounding clip, The number 6 screw we eliminated beforehand has a clip beneath it. Gently use your pry tool to take away it.
Step 9:
– Disconnect 7 cables from the logic board, Pop up all of the cables by gently lifting them along with your pry tool or spudger..
– Subsequent gently raise the camera out of the gadget. You may discover there’s a tiny tab that’s seated beneath the LCD and digitizer cables to the fitting.
– Play shut consideration to the course during which the cables pop up. The cable furthest to the fitting will pop up in the other way of the others.
Step 10:
– Take away the logic board, There are 5 screws you may have to take away with a view to take away the logic board. Three must be eliminated with a flat blade screwdriver whereas the opposite two will probably be eliminated along with your #00 Phillips screwdriver 90 Degree iPhone Lightning Cable B091CTTWPY.
– Take away the screws numbered 1-3 utilizing your flat blade screw driver. Ensure you keep in mind which of them go the place because the heads are a bit totally different.
– Now take away screws 4 and 5 along with your #00 screwdriver. Discover that the screw labeled number 5 may have a tiny gold grounding clip for the camera beneath it. Ensure you do not lose this and put it aside for re-assembly.
– It’s best to now have the ability to take away your logic board. Holding it on the backside, gently pull it upwards.
– Take be aware that there’s a small rubber piece that sits on the prime of the logic board. You will have this for re-assembly so be certain that it would not fall off. In the event you lose this, you might expertise wifi or reception points.
Step 11:
– Take away the metallic retainer & entrance going through camera, There’s a metallic retainer masking the entrance going through camera. To take away it use your pry tool to softly pull it off. Ensure you do not lose it as you may want it for reassembly. Now that the metallic retainer has been eliminated you may gently raise the entrance going through camera out of the iPhone 4.
Step 12:
– Change the entrance going through camera & metallic retainer, Now exchange the entrance going through camera with the brand new substitute half. As soon as it’s securely in place you may exchange the metallic retainer by snapping it again in place.
Step 13:
– Reassemble your iPhone 4, As soon as you’ve got gotten the entrance going through camera seated in accurately and the metallic retainer snapped again into place to carry it down, you are prepared to complete placing your Verizon or Dash iPhone 4 again collectively.
Step 14:
– Take pleasure in!!!!